ijier logo

Analysis and Measures of Main Influencing Factors on Cold Filter Point Test of Diesel Oil 103 115

Authors

  • Li Wang Author
    • Jingyi Shen Shanghai University of Engineering Sciences Translator

      DOI:

      https://doi.org/10.31686/ijier.vol10.iss5.3763

      Keywords:

      cold filter point, test, influencing factors

      Abstract

      The cold filter point is one of the important indexes to measure the low temperature performance of oil products, and the accurate measurement of the cold filter point of diesel oil has important practical significance to ensure the normal operation of the diesel engine. This paper first introduces the basic concept of cold filter point, and then analyzes the main factors affecting the test of diesel cold filter point, including the installation of cold filter point equipment, test operation process and so on. The test results show that the reliability of the test equipment and facilities and the standardization of operation have a certain influence on the cold filter point of diesel oil. Only the equipment and facilities which strictly control the cold filter point and test under the prescribed conditions can the results of the cold filter point be accurately tested.

      Author Biographies

      • Li Wang

        Sinopec Yangzhou Petroleum Branch

      • Jingyi Shen, Shanghai University of Engineering Sciences

        School of Electronic and Electrical Engineering

      References

      L. Zhao. Main factors affecting the determination of low temperature fluidity of automotive diesel oil. Inner Mongolia Petrochemical Industry, 2012, 38 (23): 77-78.

      C. Chen Chunli, J. Xie. Analysis of the factors affecting the cold filter point of diesel fuel. Shenglian Technology, 2014, 25 (2): 36-38.

      H. Li, X. Zhou, B. Shen. Composition and structure of wax crystals in diesel oil. Journal of East China University of Technology, 2006, 32 (3): 254258.

      T. Zhu, B. Xu. Low temperature performance index and cold filter point test of diesel oil. Petroleum Refining and Chemical Industry, 1981, (4): 13-16.

      C. Xu, C. Yang. Petroleum refining engineering. Beijing Petroleum Industry Publishing House, 2009 Vol 118-322.

      W. Duan, S. Wang, Z. Qiu. Analysis of key points for testing indexes of low temperature fluidity of petroleum products. Inspection, 2016 (4): 26-27.

      R. Lu. Improve the accuracy of determination and analysis of cold filter point of-35 automotive diesel oil. Science, Technology and Innovation, 2015 (15): 25-28.

      Published

      2022-05-01

      How to Cite

      Wang, L. (2022). Analysis and Measures of Main Influencing Factors on Cold Filter Point Test of Diesel Oil (J. Shen, Trans.). International Journal for Innovation Education and Research, 10(5), 170-177. https://doi.org/10.31686/ijier.vol10.iss5.3763