ijier logo

Thermal and energy balance of a fuel cell during hydrogen supply from metal hydride materials

Keywords:
Array, Array, Array, Array
Abstract

The present article deals with the material and energy balance of a fuel cell during hydrogen supply from a metal hydride tank. It describes potential utilisation of heat from a fuel cell for heating a tank in order to achieve the required kinetics of the process. The concluding part hereof contains a numerical calculation of the thermal field of the designed tank during the fuel cell operation.

Author Biographies
  1. Lukáš Tóth, Technical University of Košice

    Department of Power Engineering, Faculty of Mechanical Engineering

  2. Tomáš Brestovič, Technical University of Košice

    Department of Power Engineering, Faculty of Mechanical Engineering

  3. Natália Jasminská, Technical University of Košice

    Department of Power Engineering, Faculty of Mechanical Engineering

  4. Marián Lázár, Technical University of Košice

    Department of Power Engineering, Faculty of Mechanical Engineering

  5. Romana Dobáková, Technical University of Košice

    Department of Power Engineering, Faculty of Mechanical Engineering

References

Barbir F. PEM Fuel Cells - Theory and Practice, Elsevier, 2013, ISBN 9780-1238-77109.

Brestovič, et al. Operating parameters at hydrogen leak from a metal hydride container applied in automotive industry and pressure effects of an explosion on the environment, 2019. In: Journal of Molecular Liquids., ISSN 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2019.111206

Nafion. Creating Clean Energy for Future Transportation Dostupné na <https://www.nafion.com/en/support/white-papers/membranes-for-fuel-cells-white-paper>

Nedstack. PEM-FCS Stack Technology. Dostupné na <https://nedstack.com/en/pem-fcs-stack-technology>

Downloads
Published
2020-11-01
Section
Journal Articles
License

Copyright (c) 2020 Lubica Bednarova, Lukáš Tóth, Tomáš Brestovič, Natália Jasminská, Marián Lázár, Romana Dobáková

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.

How to Cite

Bednarova, L., Tóth, L., Brestovič, T., Jasminská, N., Lázár, M., & Dobáková, R. (2020). Thermal and energy balance of a fuel cell during hydrogen supply from metal hydride materials . International Journal for Innovation Education and Research, 8(11), 451-456. https://doi.org/10.31686/ijier.vol8.iss11.2772