ijier logo

Stencil control in the automatic insertion of a PIM Company

Authors
DOI:
https://doi.org/10.31686/ijier.vol8.iss10.2697
Keywords:
Array, Array, Array
Abstract

The article evaluated the control of Stencil in the subprocess of Printing of the SMD line of a company located in the Industrial Pole of Manaus (PIM), to provide subsidies to develop a computerized system. With computerization, the focus of employees will be directed to the activities of production and quality of manufactured products, also, the collection of process data, done in real-time, will allow managers to better monitor and take actions in the process. To this end, a case study, bibliographic research of articles, dissertations, and theses involving the theme, and documentary research (forms, records, etc.) with the sectors involved were used. The descriptive statistics method was applied, quality tools were used, aimed at identifying and solving problems such as PDCA, Pareto, Ishikawa Diagram, flow chart, and 5W2H. A study of the activities related to the control of the Stencil was carried out, of the documentation used in the process, as well as of the factors and causes related to the effective Stencil control. Among the results, 24 causes affect the performance of the Stencil control, concluding that the main failures were human, due to the prioritization of production goals by the employees, leaving the other activities in the background, which is why the 24 guidelines proposed for the computerization of this process become relevant, some of which are: defining means to identify each Stencil using a bar code or QR code; do not allow the use of the Stencil if one of the activities unfinished in the process; stop production when an activity is not performed; digitize the documents used in this process; create an automatic notification to those responsible, when an action is necessary, etc.
Author Biographies
  1. Cláudio César Vasconcelos Barros , Universidade Federal do Amazonas–UFAM

    Student of the Post-Graduation Course in Industrial Engineering and Management
    Centro de P&D de Tecnologia Eletrônica e da Informação – CETELI  

     

     

  2. Jonas Gomes da Silva, Eureka Laboratory Manaus – Amazon – Brazil

    Associate Professor at the Industrial Engineering Department of FT/UFAM

References

ANGLIN, C. Establishing a precision stencil printing process for miniaturized electronics assembly. IPC APEX Expo 2009, v. 4, p. 2001–2059, 2009.

AUGUSTO, J.; GARCIA, N. Revisão e Discussão da Norma ISO 5807 - 1985 ( E ) Proposta para Padronização Formal da Representação Gráfica da Linha de Raciocínio Lógico Utilizada no Desenvolvimento da Programação de Computadores a ser Definida no Brasil . International Organization, v. 1985, p. 1–31, 1985.

BARAJAS, L. G. et al. Stencil printing process modeling and control using statistical neural networks. IEEE Transactions on Electronics Packaging Manufacturing, v. 31, n. 1, p. 9–18, 2008. DOI: https://doi.org/10.1109/TEPM.2007.914236

BARNES, R. M. Estudo de Movimentos e de Tempos: Projeto e Medida do Trabalho. 6. ed. São Paulo: Edgar Blucher, 1977.

BITAR, N. Aplicação da teria das restrições integrada aos Seis Sigma Buscando a Gerência de Gargalos no Processo Produtivo no SMT. Manaus, 2015. 90 p. Dissertação (Mestrado em Tecnologia) – Universidade Federal do Amazonas.

BOARDS. International Journal of Engineering and Applied Sciences (IJEAS), v. 4, n. 12, p. 30–37, 2017.

CAMPOS, V. F. TQC. Controle da Qualidade Total no Estilo Japonês -. 9. ed. Nova Linda: Editora Falconi, 2014.

CAMPOS, V.F. Gerenciamento da Rotina do Trabalho do Dia a Dia. - 9.ed. Nova Linda: Editora Falconi ,2013

CONCEIÇÃO, S. V. et al. Desenvolvimento e implementação de uma metodologia para troca rápida de ferramentas em ambientes de manufatura contratada. Gestão e Produção, v. 16, n. 3, p. 357–369, 2009. DOI: https://doi.org/10.1590/S0104-530X2009000300004

DORO, M. M. Sistemática para Implantação da Garantia da Qualidade em Empresas Montadoras de Placas de Circuito Impresso. Florianópolis, 2004. p.149 Dissertação (Mestrado em Engenharia de Produção) – Universidade Federal de Santa Catarina.

FLECK, I.; CHOUTA, P. A new dimension in stencil print optimization. V. 16 Issue 1. Journal of SMT, 2003.

FREITAS, A. Epístolas da Qualidade: Afinal, o que é Qualidade? (Segundo Feigenbaum, Juran, Crosby, Deming e Ishikawa), 2009. Disponível em: <https://alvaro-freitas.blogspot.com/2009/09/afinal-o-que-e-qualidade.html>. Acesso em: 10 Janeiro, 2020.

FREITAS, L. S. DE. O uso de tecnologia da informação como ferramenta de gestão. n. 1986, p. 1–12, 1997.

FUSE. Printed Circuit Board and Surface Mount Design.Training Material , 199. Disponível em:< http://www.fuse- network.com/fuse/training/pcb/pcb.pdf>. Acesso em: 11 Novembro, 2019.

GOMES DA SILVA, J.; VICTOR LIRA DE SOUZA E SOUZA, I. How to compare energy efficiency inspection tests on TVs? International Journal for Innovation Education and Research, v. 7, n. 11, p. 1368–1393, 2019. DOI: https://doi.org/10.31686/ijier.vol7.iss11.1946

GONÇALVES, V. 7 Ferramentas da Qualidade: você sabe quais são elas? | Blog Voitto. Disponível em: <https://www.voitto.com.br/blog/artigo/as-7-ferramentas-da-qualidade>. Acesso em: 25 janeiro, 2020.

GOPAL, S. et al. Optimization of solder paste printing parameters using design of experiments (DOE) Surface mount technology (SMT) is used extensively in the electronics industry. Surface-mounted components are often smaller than their leaded counterparts, and poten. v. 43, p. 11–20, 2007.

HE, D.; EKERE, N. N.; CURRIE, M. A. Behavior of solder pastes in stencil printing with vibrating squeegee. IEEE transactions on components, packaging and manufacturing Technology: Part C, 1998. DOI: https://doi.org/10.1109/TCPMC.1998.7102530

HELDT, John J., More Than Ever, Quality Pays, Quality. February, 1994.

História do Dr. Juran | Juran. Disponível em: <https://www.juran.com/about-us/dr-jurans-history/>. Acesso em: 1 Fevereiro, 2020.

HUANG, C. Y. et al. The solder paste printing process: Critical parameters, defect scenarios, specifications, and cost reduction. Soldering & Surface Mount Technology, v. 23, n. 4, p. 211–223, 2011. DOI: https://doi.org/10.1108/09540911111169057

KANAWATY, G. Introduction to Work Study. 4. ed. Geneva: International Labour Organisation, 1992.

KHADER, N.; YOON, S. W.; LI, D. Stencil Printing Optimization using a Hybrid of Support Vector Regression and Mixed-integer Linear Programming. Procedia Manufacturing, v. 11, n. June, p. 1809–1817, 2017. DOI: https://doi.org/10.1016/j.promfg.2017.07.318

LEME, M. O.; SANTOS, M. M. D.; JUNIOR, S. L. S. Indústria 4.0 - Fundamentos, Perspectivas e Aplicações. 1. ed. Santos -SP: Érica, 2019.

LUCINDA, M.A. Qualidade Fundamentos e Praticas para Cursos de Graduação. Rio de Janeiro. Editora Brasport, 2010

MENDES, J.R.B. Gerenciamento de Projetos. Editora FGV.2015

MORAES, A. L. Otimização do Processo Produtivo de Montagem de Placas SMT. Faculdade de Jaguariúna. Jaguariúna, 2006.

MOURA, L. R. Informação: a essência da qualidade. v. 25, 1996.

PALADINI, E. P. Gestão da Qualidade: Teoria e Prática. 4. ed. São Paulo: Editora Atlas, 2019.

PAN, J. Modeling and process optimization of solder paste stencil printing for micro-BGA and fine pitch surface mount assembly. 2001.

SABINO,G. Ferramentas da Qualidade : Fluxograma – Origem e benefícios . Disponível

http://www.radardeprojetos.com.br/2018/11/ferramenta-da-qualidade-fluxograma_3.html. Acesso: 1 Fevereiro, 2020

SEZGIN, B. et al. DMAIC Methodology to Solder Paste Printing Process in Printed Circuit. International Journal of Engineering and Applied Sciences (IJEAS) ISSN: 2394-3661, Volume-4, Issue-12, December 2017

SILVA, Alon Hans Alves. A aplicação da solução WM - Wisdom Maker como ferramenta de melhoria contínua na gestão de produção: um estudo de caso na Palladium Energy Eletrônica da Amazônia LTDA. Manaus, 2015. 132 p. Dissertação (Mestrado em Engenharia de Produção) - Universidade Federal do Amazonas.

STONER, J. A. F. Administração. 5. ed. Rio de Janeiro: LTC, 1999.

SLACK, N; CHAMBERS, S; JOHNSTON, R: Administração de Produção. São Paulo: Atlas 2002

TSAI, T. N. A knowledge-based system for stencil printing process planning and control. Journal of the Chinese Institute of Industrial Engineers, v. 24, n. 6, p. 513–521, 2007. DOI: https://doi.org/10.1080/10170660709509065

TSAI, T. N. Modeling and optimization of stencil printing operations: A comparison study. Computers and Industrial Engineering, v. 54, n. 3, p. 374–389, abr. 2008. DOI: https://doi.org/10.1016/j.cie.2007.08.001

UHLMANN, I. R. Aplicação De Ferramentas do Lean Manufacturing em um Processo de SMT. p. 107, 2015.

WERKEMA,M.C.C. TQC Gestão da Qualidade Total: Ferramentas Estatísticas Básicas para o Gerenciamento de Processos. Belo Horizonte. Fundação Cristiano Ottoni, 1995.

Downloads
Published
2020-10-01
Issue
Vol. 8 No. 10 (2020): International Journal for Innovation Education and Research
Section
Journal Articles
License

Copyright (c) 2020 Cláudio César Vasconcelos Barros , Jonas Gomes da Silva

Creative Commons License

This work is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.

Copyrights for articles published in IJIER journals are retained by the authors, with first publication rights granted to the journal. The journal/publisher is not responsible for subsequent uses of the work. It is the author's responsibility to bring an infringement action if so desired by the author for more visit Copyright & License.

How to Cite

César Vasconcelos Barros , C. ., & Gomes da Silva, J. . (2020). Stencil control in the automatic insertion of a PIM Company. International Journal for Innovation Education and Research, 8(10), 417-440. https://doi.org/10.31686/ijier.vol8.iss10.2697